Mobile Heavy Equipment Repair
Off-road and jobsite equipment repaired in place — hydraulics, welding, diagnostics and mechanical faults without hauling the machine.
About this service
Hauling a broken excavator to a shop is expensive, slow and often impossible. A machine stuck at the bottom of an excavation, a loader parked in deep mud, a skid steer boxed in on a tight site — these are not candidates for a lowboy, which is why so much equipment sits broken while somebody works out what to do about it.
Mobile equipment repair brings the repair to the machine. Diagnostics, hydraulics, welding, electrical and mechanical work are all performed in place, on the jobsite, so the machine is down for hours rather than for the week it would take to arrange transport, waiting and return.
What mobile equipment repair involves
Hydraulics
Hoses crimped and fitted on site, leaking cylinders and fittings, failed pumps and control valves, contaminated fluid, and the loss of power, heat and drift that points to wear in the circuit.
Welding and structural repair
Cracked booms, buckets, quick-couplers, mounts and frames welded and reinforced on site, plus fabricated patches where a replacement component would take days to arrive.
Diesel engine and diagnostics
No-starts, starting and charging, fuel supply and injector faults, cooling system problems, power loss and the sensor faults behind most machine derates — diagnosed before anything is replaced.
Electrical and control systems
Machine wiring, sensors, solenoids, relays, joystick and control faults, safety interlocks and the intermittent electrical problems that are the hardest thing to find on equipment.
Undercarriage, drives and brakes
Track and roller condition assessment, final drive leaks, travel and slew faults, brake and parking brake problems, and driveline noise on wheeled machines.
Service and preventive maintenance
Scheduled servicing at the jobsite so machines do not sit idle in a shop queue, including filters, fluids, greasing and a structured inspection.
Common problems we are called for
If any of the following sounds familiar, call dispatch and describe it — it helps us send the right technician and the right parts on the first trip.
- Machine slow, weak or unable to lift rated capacity
- Hydraulic hose burst or oil spraying under load
- Cylinder drifting down or creeping when parked
- Machine will not start, or cranks without firing
- Cracked boom, bucket or quick-coupler
- Overheating under sustained load
- Travel, slew or steering faults
- Intermittent electrical or control faults
- Final drive or hydraulic leak under the machine
- Machine stuck on site and needing repairs in place
How Allday Fleet Solutions helps
The economics of equipment repair are simple: the machine is either working or it is costing you money, and the transport cost alone can rival the repair on a heavy unit. Keeping the repair on site is nearly always the right call, and it is what we are set up for.
Equipment faults are usually hydraulic, electrical or structural, and we carry the capability for all three — including making hydraulic hoses on the spot and welding structural damage rather than waiting on parts.
For contractors running machines across multiple sites, we also work as a scheduled maintenance partner, servicing equipment where it is parked so machines are not disappearing into shops mid-project.
Where this applies
We handle mobile equipment repair across the commercial vehicle types below and more. If your unit is not listed, call anyway — the list is not exhaustive.
- Excavators and mini excavators
- Wheel loaders and track loaders
- Dozers and graders
- Skid steers and compact track loaders
- Forklifts and telehandlers
- Cranes and man lifts
- Compressors and generators
- Agricultural and farm equipment
What you get
- No haul cost and no waiting on transport
- Hydraulics, welding and diagnostics in one visit
- Machine repaired on the jobsite, mid-project
- Honest assessment of whether a component can be repaired or must be replaced
- Scheduled servicing at your site
- Same-day response on breakdown call-outs
This is a mobile service
This is a mobile-only service. We come to the jobsite, yard or wherever the machine is parked.
Customers also ask us for
Hydraulic Hose Repair
Blown hydraulic hoses made up on the spot from the service truck, so the machine is working again in an hour instead of waiting on…
Service detailsMobile Welding
Welding brought to the truck — cracked frames, crossmembers, hangers, brackets and decks repaired on site instead of deadheading t…
Service detailsTruck Equipment Repair
Liftgates, cranes, winches, plows, spreaders, PTOs, dump beds and aerial units repaired where the truck is parked, so the equipmen…
Service detailsHeavy Duty Truck Repair
Diesel engine, drivetrain, chassis, brake and hydraulic repair for the heaviest equipment on the road — mobile where the fault all…
Service detailsMobile Mechanic Services
Scheduled and on-demand mobile maintenance — PM services, oil and filter changes, inspections and repairs done in your yard, on yo…
Service detailsMobile Equipment Repair — frequently asked
Can you repair equipment that is stuck in a difficult location?
That is the situation mobile equipment repair exists for. If the machine can be safely reached and worked on, we will repair it where it stands. Call dispatch with the location and describe the access so we can send the right truck.
Do you make hydraulic hoses on site for equipment?
Yes. Our service trucks carry hose stock, fittings and crimping equipment, so a replacement hose is built to the correct length and pressure rating at the machine. On a busy site that is frequently the difference between hours and days of downtime.
Can you weld a cracked boom or structural component?
Structural welding on equipment is part of the service. Load-bearing components get assessed honestly — where a repair is appropriate we design it to restore the strength, and where a component should be replaced we will tell you so rather than weld it and hope.
Do you service equipment on a schedule?
We can act as a scheduled maintenance partner for your equipment, servicing machines at your site or yard on an agreed interval so they are not disappearing into shops during a project.
What equipment makes and models do you work on?
Mainstream construction, earthmoving, lifting and agricultural equipment. Tell dispatch the make, model and fault when you call so the right technician and tooling are dispatched.
Tell us about the unit
Send the details and a dispatcher will come back to you. If the truck is down now, calling is faster.
Need mobile equipment repair now?
Breakdowns do not keep business hours. Our dispatch line is answered 24 hours a day, every day of the year — call and a technician is matched to your fault and your location.